dmesg - Intel Xeon E5-2666 v3
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.5-15.26.amzn1.x86_64 (mockbuild@gobi-build-60007) (gcc version 4.8.3 20140911 (Red Hat 4.8.3-9) (GCC) ) #1 SMP Wed Mar 16 17:15:34 UTC 2016
Command line: root=LABEL=/ console=ttyS0
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000efffffff] usable
BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001efffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Xen HVM domU, BIOS 4.2.amazon 12/07/2015
Hypervisor detected: Xen
Xen version 4.2.
Xen Platform PCI: I/O protocol version 1
Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
You might have to change the root device
from /dev/hd[a-d] to /dev/xvd[a-d]
in your root= kernel command line option
HVMOP_pagetable_dying not supported
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x1f0000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-combining
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 0000F0000000 mask 3FFFF8000000 uncachable
1 base 0000F8000000 mask 3FFFFC000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xf0000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fbba0-0x000fbbaf] mapped at [ffff8800000fbba0]
Base memory trampoline at [ffff880000098000] 98000 size 24576
BRK [0x01db2000, 0x01db2fff] PGTABLE
BRK [0x01db3000, 0x01db3fff] PGTABLE
BRK [0x01db4000, 0x01db4fff] PGTABLE
BRK [0x01db5000, 0x01db5fff] PGTABLE
BRK [0x01db6000, 0x01db6fff] PGTABLE
BRK [0x01db7000, 0x01db7fff] PGTABLE
RAMDISK: [mem 0x37317000-0x37feffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000EA020 000024 (v02 Xen )
ACPI: XSDT 0x00000000FC00F5A0 000054 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: FACP 0x00000000FC00F260 0000F4 (v04 Xen HVM 00000000 HVML 00000000)
ACPI: DSDT 0x00000000FC0035E0 00BBF6 (v02 Xen HVM 00000000 INTL 20090123)
ACPI: FACS 0x00000000FC0035A0 000040
ACPI: FACS 0x00000000FC0035A0 000040
ACPI: APIC 0x00000000FC00F360 0000D8 (v02 Xen HVM 00000000 HVML 00000000)
ACPI: HPET 0x00000000FC00F4B0 000038 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: WAET 0x00000000FC00F4F0 000028 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: SSDT 0x00000000FC00F520 000031 (v02 Xen HVM 00000000 INTL 20090123)
ACPI: SSDT 0x00000000FC00F560 000031 (v02 Xen HVM 00000000 INTL 20090123)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001efffffff]
NODE_DATA(0) allocated [mem 0x1effda000-0x1efffbfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000001efffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000efffffff]
node 0: [mem 0x0000000100000000-0x00000001efffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000001efffffff]
On node 0 totalpages: 1965981
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 15296 pages used for memmap
DMA32 zone: 978944 pages, LIFO batch:31
Normal zone: 15360 pages used for memmap
Normal zone: 983040 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 15 CPUs, 11 hotplug CPUs
e820: [mem 0xf0000000-0xfbffffff] available for PCI devices
Booting paravirtualized kernel on Xen HVM
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:15 nr_node_ids:1
PERCPU: Embedded 32 pages/cpu @ffff8801efc00000 s91416 r8192 d31464 u131072
pcpu-alloc: s91416 r8192 d31464 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 --
xen: PV spinlocks enabled
PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1935240
Policy zone: Normal
Kernel command line: root=LABEL=/ console=ttyS0
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 7645380K/7863924K available (4996K kernel code, 983K rwdata, 2428K rodata, 1188K init, 1580K bss, 218544K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=15, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=15.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=15
NR_IRQS:8448 nr_irqs:952 16
xen:events: Using 2-level ABI
xen:events: Xen HVM callback vector for event delivery is enabled
Console: colour VGA+ 80x25
Cannot get hvm parameter CONSOLE_EVTCHN (18): -22!
console [ttyS0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 30580167144 ns
hpet clockevent registered
tsc: Detected 2893.388 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.77 BogoMIPS (lpj=11573552)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 3 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 2 MCE banks
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 20K (ffffffff81c20000 - ffffffff81c25000)
ftrace: allocating 20544 entries in 81 pages
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2666 v3 @ 2.90GHz (family: 0x6, model: 0x3f, stepping: 0x2)
cpu 0 spinlock event irq 53
Performance Events: unsupported p6 CPU model 63 no PMU driver, software events only.
installing Xen timer for CPU 1
x86: Booting SMP configuration:
.... node #0, CPUs: #1cpu 1 spinlock event irq 59
installing Xen timer for CPU 2
#2cpu 2 spinlock event irq 65
installing Xen timer for CPU 3
#3cpu 3 spinlock event irq 71
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (23147.10 BogoMIPS)
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
xen: --> pirq=16 -> irq=9 (gsi=9)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [0] registered
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
pci 0000:00:01.1: reg 0x20: [io 0xc100-0xc10f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf1ffffff pref]
pci 0000:00:02.0: reg 0x14: [mem 0xf3008000-0xf3008fff]
pci 0000:00:03.0: [8086:10ed] type 00 class 0x020000
pci 0000:00:03.0: reg 0x10: [mem 0xf3000000-0xf3003fff 64bit pref]
pci 0000:00:03.0: reg 0x1c: [mem 0xf3004000-0xf3007fff 64bit pref]
pci 0000:00:1f.0: [5853:0001] type 00 class 0xff8000
pci 0000:00:1f.0: reg 0x10: [io 0xc000-0xc0ff]
pci 0000:00:1f.0: reg 0x14: [mem 0xf2000000-0xf2ffffff pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
ACPI: Enabled 2 GPEs in block 00 to 0F
xen:balloon: Initialising balloon driver
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 62.500000 MHz counter
clocksource: Switched to clocksource xen
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x08a0-0x08a3] has been reserved
system 00:01: [io 0x0cc0-0x0ccf] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
xen: --> pirq=17 -> irq=8 (gsi=8)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
xen: --> pirq=18 -> irq=12 (gsi=12)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
xen: --> pirq=19 -> irq=1 (gsi=1)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
xen: --> pirq=20 -> irq=6 (gsi=6)
pnp 00:05: [dma 2]
pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
xen: --> pirq=21 -> irq=4 (gsi=4)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [io 0x10c0-0x1141] has been reserved
system 00:07: [io 0xb044-0xb047] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 13156K (ffff880037317000 - ffff880037ff0000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xec000000-0xf0000000] (64MB) mapped at [ffff8800ec000000-ffff8800efffffff]
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-16 Joules
futex hash table entries: 4096 (order: 6, 262144 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1461442115.369:1): initialized
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
intel_idle: does not run on family 6 model 63
xen: --> pirq=22 -> irq=47 (gsi=47)
xen:grant_table: Grant tables using version 1 layout
Grant table initialized
Cannot get hvm parameter CONSOLE_EVTCHN (18): -22!
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
xen_netfront: Initialising Xen virtual ethernet driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
blkfront: xvda: barrier or flush: disabled; persistent grants: enabled; indirect descriptors: enabled;
serio: i8042 AUX port at 0x60,0x64 irq 12
hidraw: raw HID events driver (C) Jiri Kosina
NET: Registered protocol family 17
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: f7f5b7d9f8d42aac4517bba193efc91619c8531f'
zswap: default zpool zbud not available
zswap: pool creation failed
GPT:Primary header thinks Alt. header is not at the end of the disk.
GPT:16777215 != 31457279
GPT:Alternate GPT header not at the end of the disk.
GPT:16777215 != 31457279
GPT: Use GNU Parted to correct GPT errors.
xvda: xvda1
xenbus_probe_frontend: Device with no driver: device/vfb/0
xenbus_probe_frontend: Device with no driver: device/pci/0
Freeing unused kernel memory: 1188K (ffffffff81af7000 - ffffffff81c20000)
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1136K (ffff8800014e4000 - ffff880001600000)
Freeing unused kernel memory: 1668K (ffff88000185f000 - ffff880001a00000)
dm_mod: module verification failed: signature and/or required key missing - tainting kernel
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
udevd[818]: starting version 173
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:01.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc100 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc108 irq 15
random: sgdisk urandom read with 58 bits of entropy available
tsc: Refined TSC clocksource calibration: 2893.302 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b48b95809, max_idle_ns: 440795263684 ns
xvda: xvda1
EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null)
dracut: Remounting /dev/disk/by-label/\x2f with -o noatime,ro
EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/xvda1
dracut: Loading SELinux policy
dracut: /sbin/load_policy: Can't load policy: No such device
dracut: Switching root
udevd[1649]: starting version 173
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input4
ACPI: Sleep Button [SLPF]
ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.14.2+amzn
Copyright (c) 2009-2014 Intel Corporation.
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
ixgbevf: eth%d: ixgbevf_check_options: dynamic interrupt throttling enabled
ixgbevf 0000:00:03.0: Multiqueue Enabled: Rx Queue count = 2, Tx Queue count = 2
ixgbevf: eth0: ixgbevf_probe: Intel(R) 82599 Virtual Function
0a:cb:e2:6b:f7:ab
ixgbevf: eth0: ixgbevf_probe: GRO is enabled
ixgbevf: eth0: ixgbevf_probe: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver
mousedev: PS/2 mouse device common for all mice
random: nonblocking pool is initialized
EXT4-fs (xvda1): re-mounted. Opts: (null)
NET: Registered protocol family 10
ixgbevf 0000:00:03.0: NIC Link is Up 10 Gbps
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
netlink: 12 bytes leftover after parsing attributes in process `ip'.
ixgbevf: eth0: ixgbevf_change_mtu: changing MTU from 1500 to 9001
audit: type=1305 audit(1461442135.429:2): audit_pid=2266 old=0 auid=4294967295 ses=4294967295 res=1
EXT4-fs (xvda1): resizing filesystem from 2096635 to 3931643 blocks
EXT4-fs (xvda1): resized filesystem to 3931643